Description
Beam RF130138030BAIR Central Vacuum Hose
The Beam RF130138030BAIR Central Vacuum Hose is a 30-foot replacement hose for compatible central vacuum systems. 30-foot Beam central vacuum hose assembly manufactured by Plastiflex and identified with a tool-end connection. It is identified by supplier part number 06-1106-96 and manufacturer model RF130138030BAIR. This listing is built around the exact part number and hose configuration so customers can more easily compare the replacement they have now with the hose they need to order.
Central vacuum hoses can look very similar while using different switches, electrical connections, grips, diameters and wall-inlet configurations. For that reason, USA Vacs recommends matching the part number, connection type and handle controls before ordering instead of choosing a hose by appearance alone.
Beam RF130138030BAIR Central Vacuum Hose Features
- Length: 30 ft
- Brand / Line: Beam / Plastiflex
- Hose Type: Central vacuum hose
- Color: Not specified
- Switch / Button: Not specified
- Connection: Tool end
- Grip: Not specified
- Diameter: Not specified
- Supplier Part Number: 06-1106-96
- Manufacturer Model: RF130138030BAIR
30-Foot Central Vacuum Cleaning Reach
A 30-foot central vacuum hose gives you a practical cleaning radius for rooms, hallways, stairs and other areas served by your central vacuum wall inlets. Replacing a worn, cracked or damaged hose can restore dependable airflow and make it easier to move through the home without fighting a stiff or leaking hose.
This hose should be selected according to the controls and connection style used by your existing central vacuum system. A low-voltage hose, non-electric hose and electric pigtail hose are not interchangeable in every installation, so compare your current hose carefully.
When to Replace a Central Vacuum Hose
A central vacuum hose can gradually wear from years of bending, pulling and storage. Common reasons to replace a hose include air leaks, cracks, damaged cuffs, intermittent switch operation, worn handles, loose connections or a hose that has become difficult to maneuver.
- Loss of suction caused by cracks or leaks in the hose
- Damaged wall-end or tool-end connections
- Intermittent or failed handle controls
- Electrical pigtail or switch damage on powered hose systems
- Excessive stiffness, kinking or physical wear
- Replacing a missing hose on an existing central vacuum installation
Verify Your Hose Before Ordering
Before ordering the Beam RF130138030BAIR Central Vacuum Hose, compare the replacement with your existing hose. Check the part number whenever possible and verify the wall connection, tool end, handle style and switch configuration. If your existing hose has an electrical cord or direct-connect pins, make sure the replacement uses the same style.
For low-voltage and non-electric hoses, confirm that the inlet and cuff style match your system. If you are unsure, contact USA Vacs with photos of both ends of your current hose and any part numbers printed on the handle or cuff.
Central Vacuum Hose Specifications
- Product: Beam RF130138030BAIR Central Vacuum Hose
- Supplier Part: 06-1106-96
- Manufacturer Model: RF130138030BAIR
- Length: 30 ft
- Type: Central vacuum hose
- Color: Not specified
- Switch: Not specified
- Connection: Tool end
- Grip: Not specified
- Diameter: Not specified
Shop Central Vacuum Parts at USA Vacs
USA Vacs carries central vacuum hoses, wall inlets, powerheads, wands, motors, circuit boards, bags, filters and repair parts for residential central vacuum systems.
Frequently Asked Questions About the Beam RF130138030BAIR Central Vacuum Hose
How long is this central vacuum hose?
This hose is listed as 30 feet long.
How do I know if this hose fits my central vacuum?
Match the supplier or manufacturer part number first, then compare the wall-end connection, tool-end connection, handle controls and electrical configuration. Central vacuum hoses that look alike can use different connections.
Can I replace an electric hose with a non-electric hose?
Not if you need the hose to supply or control power for an electric power nozzle. Choose a hose with the same electrical and switch configuration as the system you are replacing.
Should I order by color?
No. Color can help identify a hose, but the part number and connection style are more important for compatibility.
What should I do if I am not sure which hose I have?
Contact USA Vacs with the central vacuum brand, any hose part numbers and clear photos of the wall end, handle and tool end. That information makes it much easier to identify the correct replacement.
Product specifications and part identification are based on the supplier listing for this exact item: 06-1106-96.
Reviews
There are no reviews yet.